Our Products

ALUMINUM WINDOWS

Sliding System Thermal Break

Alloys – 6063 / 6060/ 6061 / 6082

Frame: 120mm

Sash: 37.4mm

Fly screen can be used from inside & outside

The System covers Arch shapes, two, three & four sash including profiles for top and bottom fixed panels.

Assembly of the Frame & Sash cut 45.

Thermal strip 16mm.

EPDM Gaskets.

Finishes: Powder Coates – Anodizing.

The New Thermal Break 120mm Sliding System is designed for heavy duty use (H-HC40) according to the American National Standard. The results have been impressive and apply to energy conservation, sound reduction and water & dust proofing. The Montana Thermal Break with16mm fiberglass reinforced polyamide insulation has the sought after properties of high thermal resistance, rigidity, hardness and strength. The importance of thermal conductivity in the aluminum frame becomes apparent when one considers that the frame accounts for an average of 25% of the total window surface.

The System consists of a single frame and sash profile that will be used on all four sides, with snap on track-clips. The 16mm polyamide strips are introduced into the frame and sash profiles and then externally crimped using special tooling.

The compressive test of the crimped profile is tested to ensure maximum strength.

The System consists of a single frame and sash profile that will be used on all four sides, with snap on track-clips. The 16mm polyamide strips are introduced into the frame and sash profiles and then externally crimped using special tooling.

The compressive test of the crimped profile is tested to ensure maximum strength.

For better performance of the system, alignment cleats for the frame and shutter are used. Durable weather sealing mastic is a must at all joints. Specially designed EPDM gaskets are made available with the system to enhance the performance and create easy assembly. Other accessories such as roller & flush handles come as part of the system.

Sliding System 100mm&120mm

Features Glass – 6mm to 24mm

Alloys – 6063 / 6060/ 6061 / 6082

Frame 100mm-120mm

Sash: 23mm to 32.3mm.

Avalible with rubber sash.

Fly screen can be used from inside & Outside

EPDM Gaskets

100mm &120mm Frame available with or without

umbrella.

Assembly of the Frame cut 45 and of the Sash cut 45 & 90

Finishes: Powder Coates – Anodizing.

Sliding 100mm &120mm Series is a design concept to combine esthetics and performance. Full solution package is supported to fulfill the requirements to cover the needed applications. It is designed for heavy duty use according to the American National Standard. All profiles are available in all colors in order to meet today’s modern architectural requirements. For better performance of the system, alignment cleats for the frame and shutter are used.

Specially designed EPDM Gaskets are made available with the system to enhance the performance and create easy assembly. Other accessories such as rollers and handles come as part of the system.

Sections:

The sections in are produced by extruding aluminium on a wide range of presses starting with 800 tons to 4400 tons press. They are made of aluminium alloy 6060, 6063, 6082 and 6005 according to British Standard Specification for extrusion Dimension Tolerances BS EN 755- 9:2008 and BS EN 12020-2:2008.

Sash:

Tubular straight, elegant and stylish. A wide range is available to cover all the needed applications and glass thickness.

Assembly:

Assembly of the frames is done by 45Q cut whereas the sashes are custom 902 & 45 2 cut.


Hinged System

Sections:

The sections in Gulf Extrusions line are produced by extruding aluminum on a wide range of presses starting with 800 tons to 4400 tons press. They are made of aluminum alloy 6060, 6063, 6082 and 6005 according to British

Standard Specification for extrusion Dimension Tolerances BS EN 755- 9:2008 and BS EN 12020-2:2008.

Frame:

Strong cross sectional profile of 45mm, a wide range of frames are available to suit most of the required applications in the building

codes.

Inward & outward opening Sash:

Tubular straight, elegant and stylish of 52mm width. A wide range is available to cover all the needed applications and glass thickness.

Assembly:

Assembly of the frames is done by 452 cut same as the sashes at a custom 452 cut. All of the mounting components are made of  joints and bead clipped at a minimum height of 22 mm (back of groove)

Hinged System

Features Glass – 4mm to 28mm

Alloys – 6063 / 6060/ 6061 / 6082

System Performance:

Sliding 45mm has been tested at Al-Futtaim Exova

Air Infiltration ASTM 283-04

Water Pentration ASTM E331-OO (Static)

Wind Resistance ASTM E330-02 (Serviceability) Wind Resistance ASTM

E330-02 (Safety)

Frame 45mm & 105mm

Sash: 52mm

The System can be inward and outward opening

The System can be used for Door and Window

The System covers Arch shape, Louvers, Pivot Window & Swing Door

Assembly of the Frame & Sash cut 450

EPDM Gaskets

Finishes: Powder Coates – Anodizing.

The 45mm Hinged Series is a design concept to combine esthetics and performance. Full solution package is supported to fulfill the requirements to cover the needed applications. It is designed for heavy duty use according to the American National Standard. The results have been impressive. All profiles are available in all colors in order to meet today’s modern architectural requirements. For better performance of the system, alignment cleats for the frame and shutter are used.

Specially designed EPDM Gaskets are made available with the system to enhance the performance and create easy assembly.

Other accessories such as rollers and handles come as part of the system.